 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TM ACTS04MS Radiation Hardened Hex Inverter Pinouts 14 PIN CERAMIC DUAL-IN-LINE MIL-STD-1835 DESIGNATOR CDIP2-T14, LEAD FINISH C TOP VIEW A1 1 Y1 2 A2 3 Y2 4 A3 5 Y3 6 GND 7 14 VCC 13 A6 12 Y6 11 A5 10 Y5 9 A4 8 Y4 January 1996 tle TS S) iad- Features * Devices QML Qualified in Accordance with MIL-PRF-38535 * Detailed Electrical and Screening Requirements are Contained in SMD# 5962-96712 and Intersil's QM Plan * 1.25 Micron Radiation Hardened SOS CMOS * Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >300K RAD (Si) * Single Event Upset (SEU) Immunity: <1 x 10-10 Errors/Bit/Day (Typ) * SEU LET Threshold . . . . . . . . . . . . . . . . . . . . . . . >100 MEV-cm2/mg * Dose Rate Upset . . . . . . . . . . . . . . . . >1011 RAD (Si)/s, 20ns Pulse * Dose Rate Survivability . . . . . . . . . . . >1012 RAD (Si)/s, 20ns Pulse rte hor ds riad, * Latch-Up Free Under Any Conditions * Military Temperature Range . . . . . . . . . . . . . . . . . . -55oC to +125oC * Significant Power Reduction Compared to ALSTTL Logic * DC Operating Voltage Range . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V * Input Logic Levels - VIL = 0.8V Max - VIH = VCC/2 Min * Input Current 1A at VOL, VOH * Fast Propagation Delay . . . . . . . . . . . . . . . . . 14ns (Max), 9ns (Typ) 14 PIN CERAMIC FLATPACK MIL-STD-1835 DESIGNATOR CDFP3-F14, LEAD FINISH C TOP VIEW A1 Y1 A2 Y2 A3 Y3 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC A6 Y6 A5 Y5 A4 Y4 TRUTH TABLE Description The Intersil ACTS04MS is a Radiation Hardened Hex Inverter. INPUTS An L H OUTPUTS Yn H L d, L, l, s ic, S, , rte The ACTS04MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family. The ACTS04MS is supplied in a 14 lead Ceramic Flatpack (K suffix) or a Ceramic Dual-In-Line Package (D suffix). NOTE: L = Logic Level Low, H = Logic level High Functional Diagram An Yn Ordering Information PART NUMBER 5962F9671201VCC 5962F9671201VXC ACTS04D/Sample ACTS04K/Sample ACTS04HMSR TEMPERATURE RANGE -55oC -55oC to to +125oC +125oC SCREENING LEVEL MIL-PRF-38535 Class V MIL-PRF-38535 Class V Sample Sample Die PACKAGE 14 Lead SBDIP 14 Lead Ceramic Flatpack 14 Lead SBDIP 14 Lead Ceramic Flatpack Die 25 C 25oC 25oC o CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2001, All Rights Reserved 1 Spec Number File Number 518782 3383.1 ACTS04MS Die Characteristics DIE DIMENSIONS: 88 mils x 88 mils 2240mm x 2240mm METALLIZATION: Type: AlSi Metal 1 Thickness: 7.125kA 1.125kA Metal 2 Thickness: 9kA 1kA GLASSIVATION: Type: SiO2 Thickness: 8kA 1kA WORST CASE CURRENT DENSITY: <2.0 x 105 A/cm 2 BOND PAD SIZE: 4.3 mils x 4.3 mils > 110m x 110m Metallization Mask Layout ACTS04MS Y1 (2) A1 (1) VCC (14) A6 (13) A2 (3) (12) Y6 Y2 (4) (11) A5 NC NC A3 (5) (10) Y5 (6) Y3 (7) GND (8) Y4 (9) A4 Spec Number 2 518782 ACTS04MS All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation 7585 Irvine Center Drive Suite 100 Irvine, CA 92618 TEL: (949) 341-7000 FAX: (949) 341-7123 Intersil Corporation 2401 Palm Bay Rd. Palm Bay, FL 32905 TEL: (321) 724-7000 FAX: (321) 724-7946 EUROPE Intersil Europe Sarl Ave. C - F Ramuz 43 CH-1009 Pully Switzerland TEL: +41 21 7293637 FAX: +41 21 7293684 ASIA Intersil Corporation Unit 1804 18/F Guangdong Water Building 83 Austin Road TST, Kowloon Hong Kong TEL: +852 2723 6339 FAX: +852 2730 1433 Spec Number 3 |
Price & Availability of ACTS04MS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |